| Specification: | orders received oil canada:
The following short description about product2 imaginable in our proposal:
1) OTOMOTIV
a. Syntetic Supreme 5W-30 ( Engine Oil for Gasoline Engine who is compatible to the machine
Diesel passenger)
a. Drain interval 50 000 km
b. Inhibit wear and tear on the engine = = > decrease the cost of replacing spare parts &
the use of a car for longer, more refined engine.
c. Eliminate soot / crust on the engine oil consumption due to ' low cost' &
prevent the formation of new carbon
d. excellent soot attributable to combat poor quality & preventing Gasoline
the emergence of new crust in the combustion chamber
e. Fuel is more efficient ( 30-30% )
f. Attraction lighter engine / engine power greater / lesser deal
rise
g. Evaporation of oil is much less than Oli ' low cost' , even at replacement
as recommended there is almost no evaporation of oil
h. When replaced, oil is still suitable to be used ( maximum protection against engine)
i. All of us are purely artificial Productt Canada ( imported Buildup, not the refill in
Indonesia and Singapore) = = > guaranteed quality / best quality of our Productt
a. Duron XL 15W-40 ( Oil Engines for Heavy Duty Diesel Engines)
a. Drain interval is 30, 000 km - 60, 000 km
b. Inhibit wear and tear on the engine = = > decrease the cost of replacing spare parts &
the use of older cars
c. Eliminate soot / crust on the engine oil consumption due to ' low cost' &
prevent the formation of new carbon
d. very good fight Diesel soot in view of poor quality & high
Sulfur levels in diesel fuel
e. Fuel is more efficient ( 30-30% )
f. Attraction lighter engine / engine power greater / lesser deal
rise
g. Evaporation of oil is much less than Oli ' low cost' , even at replacement
as recommended there is almost no evaporation of oil
h. When replaced, the oil is still suitable to be used ( maximum protection against engine)
i. All of us are purely artificial Productt Canada ( imported Buildup, not the refill in
Indonesia and Singapore) = = > guaranteed quality / best quality of our Productt
b) TRAXON ( Oli Gear / axle)
a. Lifetime: 400 000 km
b. extend the life of Gear ( parts wear far less, even at temp
high)
c. prevent carbon deposit on gear.c) firecrackers ATF DEXRON III ( Oli Power Steering & Transmission automatic)
a. Lifetime: 160 000 km
b. save fuel ( more efficient transmission)
c. extend the life of the transmission ( the wear components ( bearings, bushings, gears, clutch
plate & shudder, bands) , far less)
d. smoother gearshift.
2) Industrial Lubricant:
a) HYDREX AW 46 ( Hydraulic Oil)
a. ASTM D943 who figures much higher than competitors è to oxidation,
the higher the better, more krn can not oxidize
b. Vickers figures who are far less than competitors è to friction, the more
lower the better, getting cut no friction krn / slippery, small engines Wear
c. Cleaning of the crust ( wadding & lining) and protect from the formation of crust
new, engine wear is much less than Leading Competitors
d. Did not result in crust & 8000 hours of usage ( Spec) , in Aqua ( Husky machine)
used more than 17 000 hours & still feasible to use
b) ENDURATEX EP 220 ( Industrial Gearbox)
a) Secured more than 8000 hours of usage
b) Foaming: 0
c) Emulsion: 0%
d) Cleaning Gear from the crust of oil ( either clot or crust) &
Gear protecting from the formation of new crust
e) Hours who use a lot longer, even if there is leak water & acid & high
temperature.
f) To provide Life Time who is far higher on the Gear ( gear & wear rate
who bear much less than other competitors heightens the level è
resistance load of gear & bearing)
g) Protect your gear from the resultant moisture damage, rust protect dr.
h) Even suitable for gear made of brass ( bronze & copper components)
i) maximal protection to prevent damage to gear resultant loading schock
c) SYNDURO SHB 220 ( Gear Oil who is more devoted to brass & Gear
Bearing, full synthetik)
d) COMPRO XL-S ( Compressor Fluid)
a. Lifetime: 8000 hours è can only discharge temp ( exhaust gas temp) max at 85 ° C.
Each increase of 10 ° C è 50% reduction in life time
b. No clotting completely, 100% syntetik; descale & protect
from the formation of new crust
c. Prevent carbon formation on the valve assembles
d. Hold 40-50 bar
e. Pengiritan power consumption up to 3% ( because of the quality of oil who survive longer) f. Addition of oil ( top up) that use less oil during
g. Low cost due to a more advanced replacement of oil for longer periods
h. è not mix with water resources to accelerate the return to work after there
water seepage
i. Spare Part of the compressors remain clean for a long period of time in great cost è
maintance undersell.
j. No cause of ash & odorless
h. Used in the petro Plast until 9336 hours ( not who FG) & still worth using, right now
9000 hours longer use the second ( after the oil change)
e) COMPRO XL-R ( Compressor Fluid)
Same with Compro XL-S but pressure resistant up to 413 bar ( 6000 psi) & 150 ° C
f) CALFLO AF ( Heat Transfer Fluid)
a. Petro Canada is Productt of benar2 who is devoted to heat transfer
( Example: some machines from brands Crones)
b. Early use of a lot longer than competitor products
( Cost reduction)
c. Oil vapor pressure heightens kadang2 who caused the oil out of
Control Valve, pipe joints, pump & lock cavity circulating steam.
d. Non-toxic & non-irritating skin contact.
e. Far enhances autoignition temperature ( security) where the temperature è
oil will start burning.
f. Decry the operating system of heat units ( heat transfer krn who better è
cost reduction)
g. Temperature of use: s / d 316 ° C
g) REFLO 68A ( ammonia OIL)
When kecampur ammonia, far fewer ( than competitors) missing / kebuang
Lifetime: 14 500 hours
h) luminol TR
è to transformers PLN / electricity generation è Isulator Oli ( no electricity)
Lightning arrestors, 60 before treatment, after treatment 120
Two-year lifetime, + treatment to 6 yrs
3) Grease:
a. PRECISION XL emb
Grease for electric motor bearings, suitable for high speed & no induction
magnet.
b. PRECISION GENERAL PURPOSE EP2
Multipurpose Grease
c. MOLY EP2 PRECISION GENERAL PURPOSE
For vibration and schock loadd. Peerless LLG:
High Temp s / d 200 ° C continuous, dropping points at 314 ° C
e. Peerless OG2:
Water resistant
4) Food Grade Lubricant:
All Food Grade Lubricants Petro Canada decent meal when mixed with food &
have a halal certificate from IFANCA
a) Purity FG AW Hydraulic Fluid ( Oli Hydrolik Food Grade)
a. ASTM D943 who figures much higher than competitors è to oxidation,
the higher the better, more krn can not oxidize
b. Vickers figures who are far less than competitors è to friction, the more
lower the better, getting cut no friction krn / slippery, small engines Wear
c. Cleaning of the crust ( wadding & lining) and protect from the formation of crust
new, engine wear is much less than Leading Competitors
d. Did not result in crust & 8000 hours of usage ( Spec) , in Aqua ( Husky machine)
used more than 17 000 hours & still feasible to use
b) Purity FG EP GEAR Fluid ( Oli Gearbox Industrial Food Grade)
a) Secured more than 8000 hours of usage
b) Foaming: 0
c) Emulsion: 0%
d) Cleaning Gear from the crust of oil ( either clot or crust) &
Gear protecting from the formation of new crust
e) Hours who use a lot longer, even if there is leak water & acid & high
temperature.
f) To provide Life Time who is far higher on the Gear ( gear & wear rate
who bear much less than other competitors heightens the level è
resistance load of gear & bearing)
g) Protect your gear from the resultant moisture damage, rust protect dr.
h) Even suitable for gear made of brass ( bronze & copper components)
i) maximal protection to prevent damage to gear resultant loading schock
c) Purity FG Compressor Fluid ( Kompressor Oil Food Grade)
a. Lifetime: Min. è Only 4000 hours may discharge temp ( exhaust gas temp) max in
85 ° C.
Each increase of 10 ° C è 50% reduction in life time
b. No clotting completely, 100% syntetik; to descale & protect
from the formation of new crust
c. To prevent carbon formation on the valve assembles
d. Hold 40-50 bar
e. Pengiritan power consumption up to 3% ( because of the quality of oil who survive longer) f. Addition of oil ( top up) that use less oil during
g. Low cost due to a more advanced replacement of oil for longer periods
h. è not mix with water resources to accelerate the return to work after there
water seepage
i. Spare Part of the compressors remain clean for a long period of time in great cost è
maintance undersell.
j. No cause of ash & odorless
h. Used in the petro Plast until 9336 hours ( not who FG) & still worth using, right now
9000 hours longer use the second ( after the oil change)
d) Purity FG HEAT TRANSFER Fluid ( Heat Transfer Oil Food Grade)
a. Productt from Petro Canada is benar2 who is devoted to heat transfer
( Example: some machines from brands Crones)
b. Early use of a lot longer than competitor products
( Cost reduction)
c. Oil vapor pressure heightens kadang2 who caused the oil out of
Control Valve, pipe joints, pump & lock cavity circulating steam.
d. Non-toxic & non-irritating skin contact.
e. Far enhances autoignition temperature ( security) where the temperature è
oil will start burning.
f. Decry the operating system of heat units ( heat transfer krn who better è
cost reduction)
g. Temperature of use: s / d 326 ° C
e) Purity FG WO White Oil 35 ( Multi-purpose lubricant / oil)
usability:
- Prevention of rust on the knife & cutting machine
- Coatings for buah2an & sayur2an
- Carriers for capsules obat2an
- Pelican for Backery ( so easily disposed of after leaving the oven dr)
- Plastic coating
- Retain moisture in food products
- Protection / anti-dust
- Stainless steel cleaning agent
- Eggshell coating for durability
f) Purity FG Food Machinery Grease ( Food Grade grease
a. use / addition of less ( according to experience one third of Esso) .
b.Tetap in bearings on the water or steam near the oven.
c. Bearing Suitable for heavy loads.
d. Protecting the ( much better than competitors, who even full synthetic) from damage caused by loading schock. |
