Optical Fault Locator VFL-250

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Optical fiber trouble detector straight is small and light. It can export the visible red laser of
human eye, and high-efficiently enter single module and multi module optical fiber. Leading
red laser into optical fiber by optical fiber connector, can be used as contrast among cores in
the optical fiber. It can check optical fiber trouble point which OTDR can' t find ( characteristic
of the breakpoint , the beginning and the end) and area of high loss caused by bending. For
example, optic fiber jumper, tail fine, terminal box of optic fiber core line or bare optical fiber , etc..

Main feature:
� Visual Fault Locator is used for locating broken point in fibers .
� Visual Fault Locator is equipped with a 650-nm visible laser diode can be operated in continuous or pulse modes for clear noticeable results .
� One green LED indicator shows the operating mode .
� Power switch on the end for battery on / off
� Push button operate CW / Mod. ( 2.5 Hz frequency) / pause
� Clip pocket-size pen design .
� Protective cap for extra protection .
� Low Battery Indicator: The Status LED will turn to red when batteries are low.
� Suit for 2.5mm ferrule and 1.25mm ferrule

Model VFL-250
Central Wavelength 650 + / - 10 nm
Output Power > 0.5mW into Single-mode fiber
Spectral Width < 10 nm
Transmission CW or 2.5 Hz pulse
Batteries 2 x AAA Alkaline batteries
Operating Temp. 0 ~ 50 
Detect Distance < 6 Km
Light Source Class 3A laser diode
Dimension / Weigth 13.5 mm X 170 mm / 88 g
Dimension / Weigth ( include case) 180 mm X 56 X 25 mm / 216 g

Recommend to your friends