Specification :

TMS Close-coupled Single-stage Single-suction Self-priming Pump

TMS Close-coupled Single-stage Single-suction Self-priming Pump is used chiefly as cooling water pump, sea water service pump, bilge & ballast pump.
The manufacturing standard refer to JIS SM A246 ¡° standard for marine electrical centrifugal pump manufacturer¡± higher than other marine pump company which executive of GB/T10832 ¡° marine centrifugal pump, vortex pump general technical conditions¡±.

Features
1. Low maintenance costs;
2. The shaft power curves have a highest point, so it is not to overload the motor power in any conditions.
3. The impeller is of single suction and in order to improve suction performance Francis vanes are adopt.
4. TMS type horizontal self-priming pump is permitted overhauling without removing the suction and discharge piping. It is so designed that axial thrust force becomes almost zero at the normal condition. The pump rotating element is rigidly connected to the motor shaft through closed coupling and supported by the ball bearing of the motor.
5. The shaft sealing is mechanical seal or gland-packing.

Main technical parameter
Capacity Range 5~130m3/h
Head 20~54m
Power 1.5~18.5kw